4 Reasons Your Toilet Takes a Long Time to Fill

Does it take too long for your toilet to fill with water after you flush it? This is a common problem in homes. This problem may have been caused by more than one thing. Even though none of them are very serious or expensive to fix, knowing what the problem is may help you choose the right solution so that your toilet works as well as it can again.

Why Does Your Toilet Take So Long To Fill?
​

If your toilet takes a long time to fill, it could be because of one of four things: a clogged vent, a clogged drain, malfunctioning plumbing, or a blocked pipe.
1. A vent that is clogged. If your vent is blocked, air won't be able to leave the tank, and it will take longer for the tank to fill with water. If you want to see if your vent is blocked, take the cover off the roof and look. If leaves or other things are blocking it, clean it out and see if that fixes the problem.
2. A plugged drain. For your toilet to work right, the drain in the bottom of the tank also needs to be clear. You could try plunging this out with a little vinegar and baking soda.
3. Faulty plumbing. If your vent or drain are fine, you might want to look for leaks in your plumbing. If a pipe is leaking, your toilet will take longer to fill than it should.
4. Pipe clogged. Your toilet will also fill slowly if there is something in the way of the water going into the tank. This is usually a piece of paper or a toy.

How do I fix a toilet that fills slowly?
​

Once you figure out why your toilet is taking a long time to fill, it's usually easy to fix. If a vent, drain, or pipe is clogged, you can clear it yourself. If the problem is with the plumbing, you might need to call a professional to look at it. In any case, here are four things you can try to make your toilet work again:
1. Clean out the blocked vent.
If the vent is clogged, use needle-nose pliers to pull whatever is in there out. Use vinegar and baking soda to clear out your drain. Six cups of vinegar and one cup of baking soda go into the tank. After about 10 minutes of plunging, flush the toilet.
2. Clear the drain that is clogged.
Using a small amount of vinegar and baking soda, plunge the drain. After about 10 minutes, pour a half cup of baking soda and six cups of boiling water down the drain. If that doesn't work, you can use a snake to get rid of the clog.
3. Fix any plumbing leaks you find.
If your plumbing is leaking, a professional will need to fix it.
4. Get rid of any clogs in the pipe.
If something is stopping water from going into your tank, you can clear it out with a plunger. Pouring boiling water down the drain will help break up any clogs.
If your toilet fills slowly, hopefully, one of these solutions will help. If you need help, be sure to call a professional.
If none of these work, you might need to call a plumber. A toilet that takes a long time to fill up can waste a lot of water. You should be able to count on your toilet to flush well every time you use it.

Choose CBJ Plumbing Union City NJ if you need to fix or replace a toilet.
​

CBJ Plumbing Union City NJ can help you if you have problems like a toilet that takes a long time to fill. We know a lot about plumbing and are ready to take care of your needs. Call us at 201-875-1054 to get started right away!